Product List
  • HD90-75 Clay Brick Maker1. The machine opening, core head, core rod should be replaced and adjusted in time. While they are abraded to some extent, the sizes of tile will be affected.
    2. The wearing parts should be repaired and replaced when they are abraded after a period of use, or the product quality and output will decline, such as reamers, stirring blades and mud pressing board ...
  • JKY60/60-40 Vacuum ExtruderJKY60/60-40 double vacuum extruder manufactured in our company is mainly used in brick and tile factory to produce bricks and tiles and other clay products. It is also used to produce ceramics. The processed pug is changed into the needed billets by the machine through the following steps. It is mixed first, next treated by vacuum, then conveyed and squeezed by spiral reamer, finally extruded by a fixed shaped opening...
  • JKR55/50-35 Brick Vacuum ExtruderJKY50/50-35 brick vacuum extruder should be in good water lubrication condition so the machine is enabled to obtain the maximum efficiency and prolong the service life.
    Spindle speed reducer is lubricated by an oil pump filled with N150 (GB/T3141) lubricating oil. The better refueling position is between...
  • JKB50/45-30 Clay Brick Making MachineJKB50/45-30 clay brick making machine is mainly used in brick and tile factory to produce bricks and tiles and other clay products. It is also used to produce ceramics. The processed pug is changed into the needed billets by the machine through the following steps. It is mixed first, next treated by vacuum, then conveyed and squeezed by spiral reamer...
  • JKR45/45-20 Brick Machine Extruder1. The machine opening, core head, core rod should be replaced and adjusted in time. While they are abraded to some extent, the sizes of tile will be affected.
    2. The wearing parts should be repaired and replaced when they are abraded after a period of use, or the product quality and output will decline, such as reamers, stirring blades and mud pressing ...
  • JKR40/40-20 Clay Brick Making MachineJKR40/40-20 clay brick making machine is mainly used in brick and tile factory to produce bricks and tiles and other clay products. It is also used to produce ceramics. The processed pug is changed into the needed billets by the clay brick extruder through the following steps. It is mixed first, next treated by vacuum, then conveyed and squeezed by spiral reamer, finally extruded by a fixed shaped opening...
  • JKR35/35-15 Brick Molding Machine1. The machine opening, core head, core rod should be replaced and adjusted in time. While they are abraded to some extent, the sizes of tile will be affected.
    2. The wearing parts should be repaired and replaced when they are abraded after a period of use, or the product quality and output will decline, such as reamers, stirring blades and mud pressing board ...
Related Products
  • double shaft mixingDouble shaft mixer and extruding machine is suitable for brick making raw material that has already be treated by the process of batching and crushing. The machine...
  • roller crusherThe machine is used to carry out further fine crushing of the material that has been treated by coarse crushing and secondary crushing before. The double roller ...